OUR PRODUCTS
All types of valves for whole project
INVESTMENT CASTING
1-PIECE DESIGN
SCREWED END
FLANGED END
2 PC DESIGN
TECHNICAL DATA :
Construction : 2 Piece.Blow-out proof stem, floating Ball.Soft Seated. Full Bore
Design & Mfg.Std. : AS per BS 5351
Inspection & Testing Std. : AS per BS 6755
End Connection : ANSI B 16.5 R/F
Face to Face : ASME B 16.10
Pressure & Temp. Rating : ASA 150# & 300#
AVAILABLE OPTION :
- Impregnated PTFE
- other alloys
- Actuator Operated
3 PC DESIGN FLANGE END
TECHNICAL DATA :
Construction : 3 Piece.Blow-out proof stem, floating Ball.Soft Seated. Full Bore
Design & Mfg.Std. : AS per BS 5351
Inspection & Testing Std. : AS per BS 6755
End Connection : ANSI B 16.5 R/F
Face to Face : ASME B 16.10
Pressure & Temp. Rating : ASA 150# & 300#
AVAILABLE OPTION :
- Impregnated PTFE
- other alloys
- Actuator Operated
3 PC DESIGN SCREWED END
MOC : A 105 / WCB / CFS / CFBM I CF3 I CF3M
Pressure & Temp. Rating : ASA 150#
FLUSH BOTTOM BALL VALVE
TECHNICAL DATA :
Manufacturing Std. : AS PER BS 5351 End Connection : ASA 150#
Inspection and Testing Std. : AS PER BS 5146, ISO 5208 Operating at 45 Deg.
Rajdeep Flush Bottom Ball Valves (Step Size) is another Specially for tank bottom Control. In Single Piece Design – Investment casting, fabricated & Jacketed.
Forged Steel GATE VALVE
TECHNICAL DATA :
Size Range : W‘ to 2″
Class :800 # to 2500#
Forged steel BALL VALVE
TECHNICAL DATA :
Manufacturing Std. : BS 5159 I BS 5351 (R.P.)
End Connection : Screwed Ends to BSP (F)
Inspection and Testing std. : BS 6755 (Part-I)
Forged steel GLOBE VALVE
TECHNICAL DATA :
Size Range : %” to 2′
Class : 800 # to 2500#
NRV
3 Way Ball Valves
L Port
2 -seat design
4 – seat design
T port
4 seat design
TECHNICAL DATA :
Design & Mfg.Std. : AS per BS 5351
Inspection & Testing Std. : AS per BS 6755
End Connection : ANSI B 16.5 R/F
Face to Face : ASME B 16.10
Pressure & Temp. Rating : ASA 150# & 300#
AVAILABLE OPTION :
- Impregnated PTFE
- other alloys
- Actuator Operated
4 Way Ball Valves
Double L Port
FLUSH BOTTOM TANK VALVE
Confirm to high quality & Longlife
This Valve is also known as Tank Bottom Valves. It is mainly used where mat at bottom is chocked or Clogged or suspended particals to be removed with external pressure from the bottom & receive direct flow at time.
Size :25 mm to 250 mm
Moc :AISI 304 / 316
Design & Mfg.Std. :BS 1873
AVAILABLE OPTION:
- Opening into Valve
- Jacketted Flush Bottom ValVe
- S. & Y Type
- Other alloys
Rajdeep Flush Bottom Ball Valves (Step Size) is another Specially for tank bottom Control. In Single Piece Design – Investment casting, fabricated & Jacketed.
Also ask for FEP, PFA Linned Valves, Fittings & PTFE Linned Pipes.
RAJDEEP presents more efficient, compact & fine finish Non slam check valves (NSCV) ove·r the conventional valves to prevent reverse flow. Its also called disc type check valves . The valves are extremely successful for air, water, oil, gas, steam, chemicals etc. This NSCVs are made only by Investment casting processes, so no mat. lose & compact design is being it cheaper & good finish. Flow rate can get optimum & reverse flow stops positively.
TECHNICAL DATA :
Construction : Spring loaded, self centering, wafer type, slim seal.
Design : Mfg.
Inspection & Testing Std. : API 598
Rating :PN 25/40
Flanges standard Seating: BS,ANSI ,DIN, JIS
Seating : Metal to metal, PTFE, EPDM, Viton.
Features :
- Valves can be fitted in any direction in Pipelines.
- Self centering type
- NSCVs are easy to fit bet° two
- Spring can be change according to required pressure.
- Without spring can be used in vertical direction, when inlet pressure is extremely (Back pressure required.)
- Screwed cover makes easy to clean or interchange valves seats & springs periodically.
Non slam check valves act such as immediately open by the pressure of the media & closed by the spring tension when flow stopes.
Investment Casting
Y – Type Screwed End
Flanged End 150
Y – Type
T – Type
Cast Steel Strainers
Y – Type
Basket Type
Cast Iron /Cast steel
PN 1.0
PN 1.6
SS Butterfly valves
Rubber seated
Teflon Seated
TECHNICAL DATA :
Manufacturing std. : API 609
End Connection : Water Type
Inspection and Testing Std. :API 598
Operating at 45 Deg.
Investment Casting
FULL VIEW
DOUBLE WINDOW
Barstock
CHECK NUT TYPE
SIGHT GLASS FEATURES :
- 360°Visual Flow Indicator.
- All wetted parts in Borosilicate glass & PTFE
- Unrestricted full bore flow
- Gloss available in situation for ease of maintenance
- 15 mm to 150 mm in 4′ & 6″ Length (Special length will be provided)
AVAILABLE OPTION:
- Non wetted parts M.S.J Powder Coated or Zinc Plated)
- C.-CFB I CFBM
- AISI • 304 I 316
- Ellenkey Fitted
BALL VALVES
BUTTERFLY
BALL CHECK VALVES
WAFER CHECK VALVES
FITTINGS
GATE VALVE
GLOBE VALVE
CHECK VALVE